John Deere Dealer Quoted Him $68,000 — Another Shop Found the Real Problem in Two Days

John Deere Dealer Quoted Him $68,000 — Another Shop Found the Real Problem in Two Days
Theme:
Font Size:
24px

The John Deere dealer told him it couldn't be fixed. The Massey Ferguson dealer fixed it in 2 days. There are moments in farming when you realize the person you trusted with your machinery doesn't actually know what they're talking about. Those moments cost money. Sometimes they cost the entire season.

And in the spring of 2018, standing in the service bay of a John Deere dealership in eastern South Dakota, listening to a service manager tell him his tractor needed a $68,000 transmission replacement, Daniel Kroger was having one of those moments. Daniel was 49 years old. He had been farming since he was 19, working ground his father had worked and his grandfather had cleared in the 1930s with equipment that would look like museum pieces now. Daniel ran 2,800 acres of corn, soybeans, and wheat on land that rolled gently but predictably, with soil that responded to attention and punished neglect. He was a methodical farmer, not flashy, not aggressive, but consistent.



He kept his equipment maintained. He kept his financials clean. He kept his yields above county average and his debt below what his banker considered uncomfortable. He ran a mixed fleet, three John Deere tractors, a 2012 7230R, a 2009 7430, and a 2015 8320R that handled the heavy tillage work, and one Massey Ferguson MF 7726 that he had bought used in 2016 from a dealer in Sioux Falls. The Massey had come into the operation almost by accident.

Daniel had been looking for a mid-range utility tractor to handle grain cart duty and light field work, and the John Deere dealer in Madison, the dealer he had been working with for 11 years, had quoted him $178,000 for a used 7210R with comparable hours and specs. The Massey Ferguson dealer had a 7726 with lower hours for $131,000. Daniel had done the math. He had bought the Massey. The John Deere dealer in Madison had not been pleased.

They didn't say it directly, but Daniel could feel it in the tone of the follow-up calls, in the slightly longer wait times when he needed service appointments, in the way the parts counter staff no longer remembered his name. It was a small thing, a rural thing. The kind of social friction that happens when you break an unspoken loyalty in a community where everyone knows what everyone else drives. Daniel had not cared much about the friction. The Massey Ferguson ran well.

It used less fuel than the comparable John Deere. The service costs were lower. The Massey Ferguson dealer in Sioux Falls, a shop called Northern Ag Equipment, run by a man named Carl Voss, who had been in the farm equipment business for 40 years, was responsive and competent. Daniel had the Massey service there twice in the first 2 years, and both times the work had been done correctly, on time, and at a price that matched the estimate. By the spring of 2018, Daniel had started to think about shifting more of his fleet toward Massey Ferguson when the time came to replace the older John Deeres.

The 7726 had proven itself. The cost structure made sense. The dealer relationship was solid. It wasn't an emotional decision. It was arithmetic.

And then, 3 weeks before the 2018 planting season, the John Deere 7230R started having transmission problems. It began as a hesitation. Daniel was moving the tractor from the shop to the field, light load, no implement attached, and the transmission seemed to lag between gear changes. Not a grinding sound, not a slip, just a delay, a fraction of a second where the machine seemed to be thinking about what to do next before it did it. Daniel noticed it, but didn't worry about it.

Transmissions on modern tractors were computer-controlled, and sometimes the control algorithms did things that felt odd, but weren't actually mechanical failures. The hesitation got worse over the next 4 days. By the end of the week, the transmission was occasionally refusing to shift at all. Daniel would move the lever from sixth gear to seventh, and nothing would happen. The engine would rev, but the tractor would not accelerate.

He would cycle the lever back to sixth, wait a moment, try again, and sometimes it would work. Sometimes it wouldn't. He called the John Deere dealer in Madison and scheduled a service appointment. They told him the earliest they could get him in was 10 days out. They were backed up with pre-season maintenance appointments and a couple of emergency repairs that were taking longer than expected.

Daniel said 10 days was too long. Planting season started in 12 days. He needed the tractor operational. The service scheduler said she understood, but there was nothing she could do. They were fully booked.

Daniel asked if they had a loaner tractor available. The scheduler said they did not. All loaners were already out. Daniel hung up and thought about his options. He could try to plant without the 7230R, but that would put more load on the 8320R and the 7430, and both of those machines were already scheduled for full duty across the planting window.

He could hire a custom operator to cover some of the acreage, but custom operators in the region were expensive and often booked weeks in advance during peak season. He could wait the 10 days and hope the dealer could diagnose and fix the problem quickly, but hope wasn't a planting strategy. He decided to take the tractor in anyway. He called the dealer back and explained the situation. Planting season was starting.

He couldn't wait 10 days. And if they couldn't take the tractor immediately, he would need to find another shop that could. The scheduler put him on hold. When she came back, she said the service manager would make an exception. Bring the tractor in that afternoon and they would get someone to look at it.

Daniel hauled the 7230R to Madison that afternoon on a flatbed. The service manager, a man named Rick Pendleton, who had been with the dealership for 16 years, met him in the service bay. Rick had Daniel describe the symptoms. Daniel walked through it. The hesitation, the refusal to shift, the intermittent nature of the problem.

Rick made notes. He said they would run a diagnostic and get back to Daniel within 24 hours. Daniel went home and waited. 24 hours passed. He didn't hear anything.

He called the dealership. Rick wasn't available. The service desk said they were still working on the diagnostic and would call him when they had information. Another day passed. Daniel called again.

This time Rick answered. He said the diagnostic had identified a fault in the transmission control system. The fault code indicated a failure in the transmission control unit itself, possibly combined with mechanical wear in the clutch packs inside the transmission. Rick said the recommended repair was to replace the transmission control unit. And depending on what they found when they opened the transmission, potentially replace the entire transmission assembly.

Daniel asked what that would cost. Rick said the control unit alone was $8,400. If they had to replace the transmission, the part cost was between $38,000 and $51,000, depending on which remanufactured unit they sourced. And the labor would add another $9,000 to $17,000, depending on how the removal and installation went. Total estimate, $47,000 to $68,000.

Daniel stood in his kitchen holding the phone and felt something cold settle in his chest. $68,000 on a tractor he had bought used in 2012 for $142,000 and that was now worth maybe $95,000 on a good day. The repair cost was more than 2/3 the current value of the machine. And Rick was telling him this 3 weeks before planting season with no certainty that replacing the transmission would actually solve the problem. Daniel asked how long the repair would take. Rick said 6 to 8 weeks.

The transmission unit would have to be ordered from a regional distribution center. And depending on availability, it could take 3 to 5 weeks to arrive. Once it arrived, the installation itself would take another 10 to 14 days because the transmission on the 7230R was not a simple swap. It required partial disassembly of the tractor's frame and hydraulic systems. 6 to 8 weeks.

Daniel would miss the entire planting window. The season would be over before the tractor was fixed. Rick's voice on the phone was calm and professional. He said he understood this was difficult timing. He said sometimes these things happen with older equipment.

He said if Daniel wanted to explore a trade-in on a newer model, the dealership could work up some numbers. They had a 2017 7250R on the lot that would cover the same workload. The price was $247,000. They could probably give Daniel $70,000 for the 7230R as is which would leave a net financed amount of $177,000. Daniel thanked Rick for the information and said he needed to think about it.

He hung up. He sat at his kitchen table for a long time doing math that didn't add up any way he arranged it. A $68,000 repair on a $95,000 tractor was financial insanity. A $177,000 financing package to replace a machine that had been running fine until a week ago was worse. And neither option got him into the field in time for planting.

The next morning, Daniel had a routine service appointment scheduled at Northern Ag Equipment in Sioux Falls for the Massey Ferguson 7726. Just an oil change and a pre-season inspection. The kind of maintenance he did every spring before putting the machine into full-time field rotation. He kept the appointment because he needed the Massey ready regardless of what happened with the John Deere. He pulled into Northern Ag at 9:00 in the morning.

Carl Voss was in the shop office going over paperwork with one of his service writers. Carl saw Daniel through the window and came out to the service bay. They shook hands. Carl asked how the season was shaping up. Daniel said it would be fine if he could keep his equipment running.

Carl heard something in Daniel's voice. He asked if there was a problem. Daniel hesitated. He hadn't come here to complain about another dealer. And he wasn't sure it was appropriate to ask a Massey Ferguson shop about a John Deere problem.

But Carl was looking at him with the direct, patient attention of someone who had heard a lot of machinery problems and wasn't easily surprised. Daniel told him. He walked through the whole thing. The transmission hesitation, the 10-day wait time, the diagnostic, the $68,000 estimate, the 6-to-8 week repair window, The suggestion to trade in for a $247,000 machine. Carl listened without interrupting.

When Daniel finished, Carl was quiet for a moment. Then Carl asked, "Did they tell you specifically what the fault code was? " Daniel said they had mentioned a code, but he hadn't written it down. He had the paperwork in the truck. He went and got it. Carl looked at the diagnostic sheet the John Deere dealer had printed.

He read it carefully. Then he looked up and said something Daniel wasn't expecting. "Bring the tractor here. Let me have my guys look at it. " Daniel said he wasn't sure that made sense. This was a John Deere.

Carl ran a Massey Ferguson dealership. Carl said that was true, but his lead technician, a man named Tom Eisenbron, had worked at a John Deere dealership for 12 years before coming to Northern Ag 3 years ago. Tom knew the 7230R platform inside and out. And Carl said something else. The fault code on the diagnostic sheet didn't necessarily mean the entire transmission was bad.

It could mean a sensor. It could mean a wiring harness. It could mean a valve body that needed cleaning. Carl said if it was actually a full transmission failure, he would tell Daniel that. But he thought it was worth a second opinion before Daniel made a $68,000 decision.

Daniel asked what a second diagnostic would cost. Carl said it would cost two hours of shop time, or $270. If they found the same thing the John Deere dealer found, Daniel would be out $270, and he would know for certain. If they found something different, they could talk about what the actual repair would cost. Daniel said yes.

He hauled the 7230R from Madison to Sioux Falls the next morning. Carl had Tom clear a bay. Tom was 41 years old, methodical, not someone who talked much, but someone who listened carefully when you described what a machine was doing. Daniel walked him through the symptoms the same way he had walked Rick through them. Tom made notes.

He asked three specific questions. Had Daniel noticed any unusual noises from the transmission area? Had the tractor been doing any heavy pulling in the weeks before the problem started? Had anyone done any electrical work or software updates recently? Daniel answered, "No unusual noises, no heavy pulling, mostly light transport and shop movements.

No electrical work or updates that I know of. " Tom nodded. He said he would start with a full diagnostic scan and go from there. He estimated he would have preliminary findings by the end of the day. Daniel went home. Tom called him at 4:30 that afternoon.

Tom said the diagnostic fault code was real. There was definitely something wrong in the transmission control system. But Tom had also run a manual test sequence on the transmission itself, bypassing the electronic controls, and the transmission had functioned normally through every gear. The clutch packs were engaging correctly. The hydraulic pressure was within spec.

The mechanical components of the transmission were not the problem. Tom said the problem was in the control system. Specifically, a combination of a failing position sensor on the gear selector shaft and a contaminated valve body in the transmission's hydraulic control block. The sensor was sending inconsistent signals to the transmission computer, and the contaminated valve body was causing sluggish hydraulic response, which made the computer think there was a mechanical failure when there wasn't. Tom said the fix was to replace the position sensor and disassemble, clean, and rebuild the valve body.

Total parts cost $840. Total labor approximately 14 hours. Total repair cost $2,650. Daniel asked if Tom was certain. Tom said he was as certain as he could be without actually doing the repair, but based on 30 years of working on transmissions, this was a sensor and valve issue, not a transmission failure.

Tom said if he was wrong, if they did the repair and the problem wasn't solved, Northern Ag would eat the labor cost, and Daniel would only pay for the parts. Daniel authorized the repair. Tom started the work the next morning. By noon, he had the sensor replaced. By the end of the day, he had the valve body removed, disassembled, cleaned, and reinstalled.

The following morning, he ran the tractor through two hours of test cycles. Every gear, every load condition, forward and reverse, with an implement attached to simulate real working loads. The transmission performed flawlessly. No hesitation, no delays, no fault codes. Tom called Daniel.

The tractor was ready. Daniel drove to Sioux Falls and picked up the 7230R. The invoice was $2,680, slightly higher than the estimate because one of the valve body seals had been more damaged than Tom expected and had needed replacement. Daniel paid it. He shook Tom's hand.

He shook Carl's hand. He hauled the tractor home. He did not call the John Deere dealer in Madison. Not yet. He put the 7230R into the field the next day.

Planting season had started. The tractor ran 12-hour days for nine consecutive days without a single transmission issue. The gear changes were smooth. The response was immediate. Whatever Tom had done, it had worked.

On the 10th day, Daniel drove to Madison. He walked into the John Deere dealership with the invoice from Northern Ag Equipment in his hand. He asked to speak to Rick Pendleton. Rick came out to the customer area. Daniel handed him the invoice.

Rick read it. His expression didn't change. He looked up and said, "So, you took it somewhere else? " Daniel said, "You told me I needed a $68,000 transmission. A Massey Ferguson dealer fixed it for $2,600 in two days. " Rick said, "Our diagnostic indicated a transmission control failure. We gave you the recommended repair based on manufacturer guidelines. " Daniel said, "Your diagnostic was incomplete.

The transmission wasn't bad. It was a sensor and a dirty valve. Your technician should have tested the mechanical system before recommending a full replacement. " Rick's face tightened. He said, "We follow John Deere diagnostic protocols. Those protocols are designed to prevent comebacks and ensure long-term reliability.

Sometimes that means recommending more comprehensive repairs than a quick fix. " Daniel said, "A comprehensive repair that costs $68,000 when the actual problem costs $2,600 isn't comprehensive. It's wrong. And if I had listened to you, I would have either blown $68,000 on a repair. By the fall of 2021, Daniel Kroger's entire tractor fleet was red. Not because he had developed an emotional attachment to the brand.

Not because Massey Ferguson had given him some kind of promotional deal. He had shifted because the math worked. And because Carl Voss and Tom Eisenbron had proven themselves to be better at diagnosing and fixing equipment than the John Deere dealer who had been telling him for 11 years that they were the only shop he should trust. The John Deere dealership in Madison noticed. They noticed when Daniel stopped bringing equipment in for service.

They noticed when he stopped buying parts. They noticed when he traded in two John Deere tractors at a Massey Ferguson dealer 60 miles away instead of trading them locally. In early 2020, Rick Pendleton called Daniel and asked if there was anything the dealership could do to win back his business. Daniel said there wasn't. Rick asked if it was about the transmission repair estimate.

Daniel said it was about trust, and that once you lose it with a farmer, you don't get it back. Rick said he understood. He didn't try to argue. The call lasted 3 minutes. Daniel never spoke to Rick Pendleton again.

But the story of the $68,000 transmission that didn't need replacing traveled through the farming community in Eastern South Dakota the way stories like that always travel. Quietly in coffee shops and co-op parking lots and equipment auctions, shared between farmers who had all been in the position of trying to decide whether a dealer's recommendation was accurate or inflated. Carl Voss heard versions of the story at least a dozen times over the next 2 years. He never repeated it himself. He didn't need to.

Word of mouth in rural South Dakota worked better than any advertising. Northern Ag's customer base grew by 18% between 2018 and 2021. Some of that was farmers switching from other brands. Some of it was farmers who had been buying used equipment privately deciding they wanted a dealer they could trust. Carl never marketed the fact that his shop had fixed a John Deere tractor that a John Deere dealer couldn't fix.

He didn't need to. Daniel Kroger told that story every time someone asked him why he had switched to Massey Ferguson. And Daniel told it plainly, without exaggeration, the way a man tells a story when the facts are dramatic enough on their own. The John Deere dealer told him it couldn't be fixed without a $68,000 transmission replacement. The Massey Ferguson dealer fixed it in two days for $2,600.

The tractor ran flawlessly for another 3 years. The dealer who got it right earned a customer for life. The dealer who got it wrong lost one. That was the entire story. There was nothing else to say.

Daniel Kroger farmed 2,800 acres in Eastern South Dakota with a full fleet of Massey Ferguson tractors serviced by a dealer 60 miles away who had earned his business by being competent, honest, and fast when it mattered. He paid slightly more in fuel costs driving to Sioux Falls than he would have paid driving to Madison. It was worth every gallon. Because trust, once broken, doesn't rebuild itself. And in farming, trust is the only currency that matters when your machinery is down and the season won't wait.

News in the same category