Some of them don't. Some of them have been so mistreated that every component is fighting you. This one has problems, but the core is sound. Jack Morgan took care of this bike for a long time before it fell apart. Marcus thought about a man who had ridden this motorcycle for decades before his knees gave out, who had kept it through 15 years of not being able to ride it, who was lying in a hospital bed asking about it every hour.
"Yeah," Marcus said. "He did. " The phone call from Sandra came at 11:43. Marcus stepped outside to take it, which was something he almost never did, but something in the way Sandra's name appeared on his screen told him this wasn't a routine update. "He had a bad night," Sandra said. Her voice was flat in the way of voices go flat when a person has been crying for a long time and has temporarily run out.
They adjusted his medication this morning. He's more comfortable now, but she stopped. "The doctor had a conversation with us this morning about what we should be preparing for. " Marcus stood in the parking lot and said nothing because there was nothing useful to say. "He was lucid for about an hour this morning," Sandra continued. "He asked about the bike.
I told him what you said yesterday that a veteran was working on it, that it was in good hands. " A pause. "He didn't say anything for a minute. Then he said, 'What branch?' I told him army. He said, 'Vietnam?' I said I didn't know. He said, 'Ask him.'" Marcus almost smiled.
"I'll ask him. " "Marcus. " Her voice shifted, lost its flatness where you found something raw underneath it. "He asked me to tell the mechanic something. The veteran. He asked me to tell him he said, 'Tell him I know what it costs to work on something you love when your body's telling you to stop. Tell him I see him.'" Marcus stood very still.
The Arizona sun was already serious at this hour, and he could feel it on the back of his neck, but he didn't move. "I'll tell him," Marcus said. He went back inside. Walter was at the workbench cleaning the piston with a solvent dampened cloth moving in careful circles. Marcus stood next to him and repeated what Sandra had told him, the question, the message, all of it.
Walter kept working while Marcus talked. When Marcus finished, Walter was still for a moment. His hands stopped. "Vietnam," Walter said, "two tours, '68 and '70. " He resumed the careful circular cleaning motion. "Tell him yes. " Marcus didn't move.
"He said he sees you. " Walter's hands slowed again, just for a breath, then they kept moving. "Tell him I see him, too. " Walter said quietly. Marcus nodded. He walked back to the office to call Sandra. And when he was gone, Joey, who had been pretending to inventory parts at the far end of the bench, looked at Walter's back and then looked away and didn't say anything because some things don't need commentary.
The machinist, Ray Delgado, arrived at 1:00 in the afternoon. He was a compact, precise man in his mid-50s who ran a shop that had been in his family for 30 years, and he had the particular demeanor of someone who had heard every kind of technical problem there was and wasn't possible to impress. He listened to Walter's description of the cam chest issue without interrupting. He asked four clarifying questions. He looked at the cam chest.
He measured two things with tools he brought from his truck. "Can you true it? " Walter asked. "I can true it," Ray said. "Two, three hours in the shop, but I need the exact specification for the '76 cam timing. I've got the general shovelhead reference, but you said "I said it's different. " Walter recited the specification from memory, two numbers precise to the thousandth of an inch.
Ray wrote them down and looked at them and then looked at Walter. "You're sure about these, I'm sure? " Ray looked at them again. "These are different from every published reference I have. " "I know. " A pause. "Where did you get them? " "I got them from an engineer at the Milwaukee plant in 1979," Walter said. "We had had conversation at a maintenance conference.
He told me the published spec had an error in it that Harley had decided not to correct publicly because correcting it would mean acknowledging that bikes built to the published spec were slightly off. He gave me the correct number. He picked up his coffee. I've never had reason to use it until now. Ray Delgado looked at the numbers he'd written down for a long moment.
Then he said, "All right, I'll have it back to you by 4:00. " He left with the cam chest in a padded case and the shop fell back into its rhythm. The crisis arrived at 2:17 in the afternoon, announced by nothing more dramatic than Derek saying in a voice that was very carefully not panicked. "Hey, Marcus, come look at this. " Marcus came. Joey came. Walter set down what he was working on and came.
Derek was holding the oil pump, the rebuilt oil pump that Joey had spent the better part of 2 days reconstructing from parts sourced from three different suppliers across four states. He was holding it under a light and he was pointing at something on the pump body with one finger. "I was doing the final check before installation," Derek said, "running through Walter's checklist, and I found this. " What he had found was a crack, not the same kind of hairline they'd found on the engine case, a visible fracture in the pump body starting at a stress point and running nearly a quarter of the way around the circumference. A fracture that had almost certainly been there when the replacement pump body arrived invisible under the surface grime until Derek had cleaned it as part of the pre-installation check. "When did this happen? " Marcus said.
"It was in the part when it arrived," Derek said. "I think it might have been there, or it might have developed when I was pressing the gears in. " He looked at Marcus. "I pressed them at the force spec you use for standard pump assembly. " "Wrong spec," Walter said. He didn't say it as an accusation. He said it the same way he said everything as a fact that needed to be on the table.
The '76 pump body uses a lighter press spec than later models, different wall thickness. He looked at Derek. You used the spec from a reference. The shop manual, Derek said. Which year's manual?
Derek's face changed. The general shovelhead service manual. I don't know what year it covers. Post 78, Walter said. Harley changed the pump body spec in 78.
The manual you have doesn't cover the 76 correctly. He looked at the cracked pump body in Derek's hand. It's not your fault. You couldn't have known what you didn't know. I broke the part, Derek said.
The wrong specification broke the part, Walter said. You were the instrument. That's different. Derek stared at him. He wasn't young enough to be naive, but he was young enough that being told something wasn't his fault by someone who could clearly see whether it was or wasn't.
That landed differently than it would have from Marcus or Joey. He nodded slowly. Okay, he said. So, what do we do? Marcus was already on his phone pulling up supplier contacts.
He called the first one. On back order, 2 weeks minimum. He called the second. No stock for the 76 pump body, suggested a rebuild kit. He called the third.
They had one in stock in Michigan, 2-day shipping minimum. We don't have 2 days, Joey said. I know, Marcus said. The shop went quiet in the particular way that it goes quiet when a group of people are all thinking hard and not wanting to be the one who says the obvious thing out loud. Walter was looking at the cracked pump body in Derek's hand.
Looking at it with the specific attention he brought to everything, the attention that wasn't just looking, but reading. Give me that, he said. Derek handed it over. Walter turned it in his hands. He examined the crack carefully.
He pressed gently on either side of it with two fingers testing the flexibility of the material. This crack is incomplete, he said. It's cracked, Marcus said. It's cracked, but it hasn't propagated through the full wall thickness. He held it up to the light again.
Here and here the material is still sound. The crack started at the stress point from the press operation, but it didn't finish. The pump would have failed maybe immediately, maybe after an hour of running, but the material itself isn't gone. Can we repair it? Joey asked.
Cast iron, Walter said. He was still looking at the pump. The right repair done correctly is structurally sound. I've repaired cast iron components under worse circumstances. He set the pump down.
It requires nickel brazing rod, low heat, very slow cooling. You have to do it right and you have to let it cure properly. He looked at Marcus. Do you have a torch set up that can do low heat precision work? We have a TIG set up, Marcus said.
Walter shook his head. Too hot, too fast. It'll stress the surrounding material and the crack will propagate. He thought for a moment. Oxyacetylene, low pressure.