Otto and Jack had worked through one complete night to address the oil pump assembly correctly, fabricating a custom bracket because the original specification part was no longer in production, and Otto had finished the weld the way he always finished welds. With a small counterclockwise spiral turn pressed into the metal like a signature. Jack had recorded everything. The oil pressure readings at different temperatures, the degree of inclination for the custom bracket, the type of alloy used in the fabrication, the specific seal dimensions.
He had written it all in a leather notebook with a dark green cover that he labeled, in his own handwriting, simply as Nürburgring followed by the year. When Claire died 6 years later in a hospital room in Connecticut on a November evening while Lily was 3 years old and asleep in a chair in the waiting area, Jack had put the notebook in the bottom drawer of his desk in the garage and locked it. He had not opened it since. He had kept it the way people keep certain photographs, not to look at, but to know they still exist.
Now standing in the six-car garage of the Ashford estate with Sarah Ashford's deadline ticking and Lily's backpack straps still pulled tight near the side entrance, Jack did the only thing that made sense. He called his garage assistant, a young man named Marcus, who had a gift for finding things, and he told him to open the bottom drawer of the desk with the small key on the orange keychain. Find the green notebook and photograph every page related to the oil pump assembly. Marcus, to his credit, did not ask questions.
He said he would send the photos within 20 minutes. While he waited, Jack made a second, slower circuit of the engine compartment with the penlight. He was not looking for the same thing now. He was looking for the bracket itself.
The custom-fabricated piece that Otto had built from scratch during that night in Germany, and he was comparing it against the image in his memory. What he found was almost identical. Almost. The bracket present in the engine now was a very good copy.
The dimensions were close. The alloy appeared similar. But the degree of inclination was wrong by a margin that no one without specific knowledge of the original would have detected. The original bracket had been set at exactly 4° of forward tilt to account for the thermal expansion pattern of the block under sustained highway driving.
This copy was set at closer to 3 and 1/2°. The difference was less than the width of a thumbnail. But at operating temperature, over approximately 90 to 100 miles of sustained speed, that half degree created a pressure differential at the pump inlet that was just large enough to cause intermittent oil starvation at the top of the stroke. The engine did not blow.